Beeswift Nitrile Disposable Gripper Glove Powder-Free Black Bulk Box

Powder Free black textured Nitrile Gloves

EN ISO 21420: 2020

• EN 388:2016+A1:2018
• Level 0 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 0 - Tear Resistance
• Level 0 - Puncture Resistance
• Level A - TDM Cut Resistance (ISO 13997)

EN 374-5: 2016
Resistance to Bacteria and Fungi PASS
Resistance to Virus PASS

EN ISO 374-1:2016+A1:2018 / TYPE B
n-Heptane(J) - More than 30 Mins (level 2).
Sodium Hydroxide 40%(K) - More than 480 Mins (level 6).
Ammonium Hydroxide 25%(O) - More than 10 Mins (level 1).
Formaldehyde 37%(T)- More than 480 Mins (level 6).
Hydrogen Peroxide 30%(P) - More than 30 Mins (level 2).

EN ISO 374-1:2016+A1:2018 - Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks
  J: n-Heptane 2: 30 - 59 minutes
  K: 40% Sodium Hydroxide 6: above 480 minutes
  O: 25% Ammonium Hydroxide 1: 10 - 29 minutes
  P: 30% Hydrogen Peroxide 2: 30 - 59 minutes
  T: 37% Formaldehyde 6: above 480 minutes

EN ISO 374-5:2016 - Terminology and performance requirements for micro-organisms risks
  Resistance to Bacteria and Fungi Pass
  Resistance to Virus Pass

EN ISO 21420: 2020 - Protective gloves. General requirements and test methods

EN 388:2016 +A1: 2018 - Protective gloves against mechanical risks
  Abrasion Resistance 0: Did not achieve lowest score
  Cut Resistance (Coupe Test) X: Not Tested/Blade was blunted (ISO 13997 cut test required)
  Tear Resistance 0: Did not achieve lowest scores
  Puncture Resistance 0: Did not achieve lowest score
  Cut Resistance (ISO 13997) A: Low cut reistance (2N)

EN 374-4:2019 - Determination of resistance to degradation by chemicals
  (J) n-Heptane Degredation 51.1 %
  (K) Sodium Hydroxide 40% Degredation -17.4 %
  {O} Ammonium Hydroxide 25% Degredation 88.6 %
  (P) Hydrogen Peroxide 30% Degredation 20.0
  (T) Formaldehyde 37% Degredation 21.4 %